Bright Steel Bar

Bright Steel round bar are produced from black bars by passing through dies in a cold condition or by turning the bars in a peeling machine and some other processes. They are used where specific tolerance are required such as for use in CNC machines, etc. Sometimes heat treatment such as annealing is done before cold finishing.

There are five main types of different processes to achieve the desired sizes.

Drawing

The bright steel round bars are drawn through dies of the required shape. The raw material is chosen depending on the shape to be drawn. This increases the yield strength and tensile strength. This also eliminates a number of surface imperfections caused due to the rolling process.

Peeling

The black bars are turned to the desired sizes. This process eliminates all surface imperfections. But internal imperfections if any are exposed. This process does not increase the tensile strength of the bars

Grinding

The grinding process is used to narrow the tolerances and improve the surface finishes of the above two processes

Polishing

The polishing process improves the surface finish of the bars

Cold Rolling

Cold Rolling is typically used to produce complex shapes.

Supply Cities:

Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Tuticorin, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thanjavur, Trichy, Erode, Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchipuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijayawada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.