P20+S
Grade Introduction:
P20+S steel has good cutting properties, usually uses plastic mold, Injection molding, and die mold. The P20+S steel materials delivery condition as per different customer requirements, usual delivery condition as Pre-hardness, hardness 28-34 HRc. Saaj steel is a professional AISI P20S tool steel supplier, Inventory, and manufacturer.
Grade Application
Tool steel P20 + S is suitable for mold production, improve the machining performance is required. Typical applications include support and injection mold, mold holders and zinc die casting mold. P20S is a versatile plastic mold and the characteristics of high-strength steel are applicable to many other applications, such as axis and wear a belt.
Equivalent Grades
P20+S is a high alloy Chrome Cold work tool steel. ASTM A681 AISI P20 steel standards and steel grades equivalent as below:
- BS BP20S
- ASTMA681
- GB 3Cr2MoS
- DIN 40CrMnMoS8-6
- W-Nr 1.2312
- UNS T51620S
Our Supply Range
We supply to automotive ancillaries and OEM customers. The products we manufacture are used as input for manufacturing of automotive and general engineering components. These components are further assembled into systems fitted in automobiles and other engineering applications.
| Product Type | Size Range |
|---|---|
| Forged Round Bars | 140mm Dia and above |
| Rolled Round Bars | 12mm Dia and above |
| Forged Flat Bars | Thickness: 32mm to 510mm, Width: 65mm to 1050mm |
| Rolled Flat Bars | Thickness: 6mm to 110mm, Width: 25mm to 810mm |
Chemical Composition
The following table shows the chemical composition of P20+S steel:
Element |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Content(%) |
0.35-0.45% |
0.30-0.50% |
1.40-1.60% |
0.030 Max |
0.05-0.10% |
1.80-2.00% |
0.15-0.25% |
Heat Treatment
Heat treatment temperatures, including the rate of heat, cool, and soak times will vary due to factors such as the shape and size of each steel component. Please consult your heat treatment provider for full guidance on heat treatment of tool steel P20+S.
Hardness
28-34 HRC P20+S is not suitable for polishing or applications where a fine finish is required.
Hardening
830-870°C, quenching in oil.
Thermal Properties
Thermal expansion: 12 x 10-6/ºC, 20-100°C
Forging Properties
Slowly heat P20+S to 1050°C，start forging, ensure forging temperature no lower than 930°C.
Stress Relieving
When dies made from P20+S are heavily machined, we recommend stabilizing the steel just before finish machining in order to relieve machining strains. Heat up to 460-500°C, soak well, and cool in the air.
Mechanical Properties
The mechanical properties of H11 tool steels are tabulated below.
AISI P20+S Steel Mechanical Properties
- Poisson’s ratio 0.27-0.30
- Izod impact unnotched 28.0 J
- Elastic modulus 190-210GPa
Tempering
Heat to tempering temperature then cools in air.
Normalizing
900°C
Annealing
Heat to 710-740°C. Soak enough time, ensure heat thoroughly, then cool in the furnace slowly.
Density
Density: 7.85kg/cm3.
Machinability
60-65% of a 1% carbon steel
Welding
Steel AISI P20, of medium carbon content typically around 0,35 %, is supplied in the quenched and tempered condition with a hardness of 30-32 HRC. It has a long history of success in the industry of molds of injection of plastics, however with serious problems when repaired by welding, when it is indispensable a post-weld heat treatment for tempering and stress relieving, with negative effects on dimensional stability, the necessity of machining rework and lower productivity.
Supply Cities
Ambattur, Bangalore, Chennai, Chengalpattu, Coimbatore, Dindigul, Guindy, Madurai, Nellore, Hyderabad, Hosur, Tiruvallur, Tirupur, Tuticorin, Andhra Pradesh, Karnataka, Puducherry, Kerala, Kanyakumari, Telangana, Salem, Thanjavur, Trichy, Erode, Vellore, Karur, Nagercoil, Kanchipuram, Karaikudi, Pudukottai, Nagapattinam, Nemili Thiruvanmiyur, Perungudi, Kurichi, Kakkalur, Keelanagachi, Paramakudi, Thandarai, Alathur, Kodur, Mallur, Gangaikondan, Sriperumbudur, Oragadam,Irungattukottai, Vallam Vadagal, Siruseri,Eraiyur, Manapparai, Perundurai, Ranipet, Gummidipoondi, Cheyyar, Manamadurai, Tindivanam , Mappedu , Thervoykandigai , Nilakottai, Shoolagiri, Kurubarapalli, Bargur, Thirumudivakkam, Cuddalore, Pillaipakkam.
People also search as
P20+S Steel Round Bar, P20+S Steel Round Bar Manufacturers, P20+S Steel Suppliers, P20+S Stockist, P20+S Steel Dealers, P20+S Steel Distributors, P20+S Wholesalers, P20+S Steel Traders, P20+S Steel Square Distributors, P20+S Steel Flat Bar, P20+S Steel Companies Near me.
P20+S, P20+S Steel, P20+S Chemical composition, P20+S Mechanical properties, P20+S Equivalent Grades, P20+S Steel plate, P20+S Steel sheet, P20+S Manufacturers, P20+S Suppliers, P20+S Dealers, P20+S Stockist, P20+S Distributors, P20+S Wholesalers, P20+S Traders.
Addition to other grades
MS, EN1A, EN3B, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, EN47, EN353, IS2062, 42Crmo4, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS, M2, M35, M42, DIN1.2714, P20, P20+S, P20+Ni, SCM420, ASTMSA-36, ASTMSA-105, SAE1018, SAE4140, SAE8620, 16MNCR5, 20MNCR5, C20, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.
