EN1A Round Bars, EN1A Round bar manufacturer, EN1A Rods Supplier, EN1A Stockiest, EN1A Dealers, EN1A Distributors, EN1A Whole sellers.
 
Grade Introduction:
EN1A is a very popular grade of low carbon-manganese free cutting steel, which is most suitable for the manufacture of repetition turned components, such as nuts, bolts, hydraulic fittings and studs, particularly where intricate drilling and machining operations are involved. 
It can be case-hardened, producing components with enhanced wear resistance. En1a is also available as En1a leaded (En1aPb) for greater  machinability. Swarf will form in small chips to prevent machine blockage.
EN1a Non-Leaded steel is a Re-Sulphurised Free Machining Steel. This is a premium grade of free cutting steel. It has excellent machinability. It is suitable for case hardening and electroplating. We can provide you with free cutting steel both in the black and bright cold drawn bar form.
 
Grade Application:
En1a steels are suitable for applications where good machinability is the prime consideration. Because of this, they are used for the rapid production on single or multiple spindle automatic lathes and capstan lathes of finely finished components which will not be subjected to high stresses in service, e.g. light duty studs, cycle components and many intricate parts for textile and printing machinery. This type of steel cannot be relied upon to possess good transverse properties and should not be used for hollow parts which might be subjected to an internal pressure which would set up wall stresses dangerously near to the transverse yield stress. Case hardening can be carried out but this steel Is not recommended for general case hardening work and it is not intended for use where the hardened case is subject to severe impact in service.
Typical applications are:
  • Brake hose end,
  • hydraulic parts,
  • pulleys,
  • disc brake pistons,
  • wheel nuts and inserts,
  • control linkages,
  • hear box components (case hardened),
  • domestic garbage bin axles,
  • concrete anchors,
  • padlock shackles,
  • hydraulic fittings,
  • vice jaws. 
En1a steel bars are used mostly in the bright form.
 
Equivalent grades:
BS970: 1955 EN1A, BS970/PD970: 1970 onwards 230M07. 
Related European grades: 9SMn28, BS En 11SMn30
Werkstoff no. 1.0715
US Grades SAE (AISI) 1213, 1215.
 
Addition to other grades:
MS, EN3b, EN8, EN8d, EN9, EN19, EN24, EN31, EN32b, EN36c, EN41b, EN43b, EN47, EN353, IS2062, 42Crmo4, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS, M2, M35, M42, 2714, SKD-11, P20, P20+s, P20+Ni, SCM 420, ASTM Sa-36, ASTM SA-105, SAE 1018, SAE 1020, SAE 4140, SAE 8620, 16MNCR5, 20MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.
 
Our Supply Range:
 
Price List:

 
People also search as:
EN1A, EN1A Steel, EN1A Chemical composition, EN1A Mechanical properties, EN1A Equivalent Grades, EN1A steel plate, EN1A steel sheet, EN1A manufactures, EN1A suppliers, EN1A dealers, EN1A Stockiest, EN1A distributors, EN1A whole sellers,  EN1A Traders.
 
Chemical composition:
The following table shows the chemical composition of EN1A steel:
Element
C
Mn
Si
S
P
Content(%)
0.07-0.15
0.80-1.20
0.10 Max
0.2-0.3
0.07 Max
 
Mechanical Properties:
Max Stress
370-480 n/mm2 Min
dependent on ruling section
Yield Stress
240-400 n/mm2 Min
dependent on ruling section
0.2% Proof Stress
225-360 n/mm2 Min
dependent on ruling section
Elongation
6-10% Min
dependent on ruling section
 
Hardness:
 
Heat treatment:
  • Carbonization of EN1A bright mild steel takes place at 900-950 o C then it is furnace or air cooled.
  • En1A can be tempered at 180-210  o C then should be left to cool in air.
  • The mild steel can be hardened at 780-800 o C then quenched in oil or water. However this is difficult to do with EN1A and is not recommended.
 
Hardening:

 
Tempering:
 
Physical Properties:
 
Thermal Properties:
 
Forging Properties:
 
Stress Reliving:
 
Normalizing:
 
Annealing:
 
Density:
 
Machine ability:
 
Welding:
 
Supply Cities:
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Thoothukudi, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thajavur, Tiruchurapalli, Comibatore, Erode,  Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchepuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijaywada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.