C60 Round Bars, C60 Round bar manufacturer, C60 Rods Supplier, C60 Stockiest, C60 Dealers, C60 Distributors, C60 Wholesellers.
 
Grade Introduction:
C60 steel is an unalloyed medium carbon engineering steel which has 0.57%-0.65% Carbon as per EN10083 standard. It has characteristics similar to that of C55 carbon steel which has high hardness and high strength  after hardening.C60 is difficult to weld, and machinability is poor due to high carbon content. This steel is generally supplied in an untreated or normalized condition.
 
Grade Application:
C60 is an unalloyed heat treatable steel. It is mainly used for parts of mechanical and vehicle engineering. Typical application such as: wheels, rims, toothed shafts, cylinders, shafts, axles, pins, screwdrivers, pliers and similar items
 
Equivalent grades:
USA
UK
China
Japan
Australia
1060
070M60
60#
S60C
1060
 
Addition to other grades:
MS, EN1a, EN3b, EN8, EN8d, EN9, EN19, EN24, EN31, EN32b, EN36c, EN41b, EN43b, EN47, EN353, IS2062, 42Crmo4, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS, M2, M35, M42, 2714, SKD-11, P20, P20+s, P20+Ni, SCM 420, ASTM Sa-36, ASTM SA-105, SAE 1018, SAE 1020, SAE 4140, SAE 8620, 16MNCR5, 20MNCR5, C20, C35, C40, C45, C50, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.
 
Our Supply Range:
 
Price List:

 
People also search as:
C60, C60 Steel, C60 Chemical composition, C60 Mechanical properties, C60 Equivalent Grades, C60 steel plate, C60 steel sheet, C60 manufactures, C60 suppliers, C60 dealers, C60 Stockiest, C60 distributors, C60 whole sellers, C60 Traders.
 
Chemical composition:
The following table shows the chemical composition of C60 steel:
Grade
C
Mn
P
S
Si
Cr
Mo
Ni
Cr+Mo+Ni
C60/1.0601
0.57-0.65
0.60-0.90
≤ 0.045
≤ 0.045
≤ 0.4
≤ 0.4
≤ 0.1
≤ 0.4
≤ 0.63
C60E/1.1221
0.57-0.65
0.60-0.90
≤ 0.03
≤ 0.035
≤ 0.4
≤ 0.4
≤ 0.1
≤ 0.4
≤ 0.63
C60R/1.1223
0.57-0.65
0.60-0.90
≤ 0.03
0.02-0.04
≤ 0.4
≤ 0.4
≤ 0.1
≤ 0.4
≤ 0.63
 
Mechanical Properties:
Mechanical properties a at room temperature in the quenched and tempered condition (+QT)
Diameter d mm
≤ 16
16-40
40-100
Thickness t mm
< 8
8-20
20-60
Yield Strength Mpa
≥580
≥520
≥450
Tensile Strength Mpa
850-1000
800-950
750-900
Elongation, %
≥11
≥13
≥14
Reduction of area ,%
≥25
≥30
≥35
 
Mechanical properties a at room temperature in the normalized condition (+N)
Diameter d mm
≤ 16
16-100
100-250
Thickness t mm
≤ 16
16-100
100-160
Yield Strength Mpa
≥380
≥340
≥310
Tensile Strength Mpa
≥710
≥670
≥650
Elongation, %
≥10
≥11
≥101
 
Hardness:
 
Heat treatment:
 
Hardening:
  • Hardening:810 – 850°C,water or oil quench
 
Tempering:
  • Tempering:550 – 660°C,Cooling in air
 
Physical Properties:
Physical Properties
Metric
Imperial
Density
7.85 g/cm3
0.284 lb/in3
 
Thermal Properties:
 
Forging Properties:
C60 steel forging temperature:900 – 1100°C , cooling as slowly as possible in sand after forged.
 
Stress Reliving:
 
Normalizing:
820 – 880°C, Cooling in air.
 
Annealing:
680 – 710°C,Cooling in furnace.
 
Density:
Density
7.85 g/cm3
0.284 lb/in3
 
Machine ability:
 
Welding:
 
Supply Cities:
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Thoothukudi, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thajavur, Tiruchurapalli, Comibatore, Erode,  Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchepuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijaywada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.