ASTM SA-36 Round Bars, ASTM SA-36 Round bar manufacturer, ASTM SA-36 Rods Supplier, ASTM SA-36 Stockiest, ASTM SA-36 Dealers, ASTM SA-36 Distributors, ASTM SA-36 Whole sellers.
 
Grade Introduction:
ASTM  SA36 is the most commonly used mild and hot-rolled steel. It has excellent welding properties and is suitable for grinding, punching, tapping, drilling and machining processes. Yield strength of ASTM  SA36 is less than that of cold roll C1018, thus enabling ASTM  SA36 to bend more readily than C1018. Normally, larger diameters in ASTM  SA36 are not produced since C1018 hot roll rounds are used.
 
Grade Application:
ASTM  SA36 steel has the following applications:
  • It is used in bolted, riveted or welded construction of bridges, buildings and oil rigs.
  • It is used in forming tanks, bins, bearing plates, fixtures, rings, templates, jigs, sprockets, cams, gears, base plates, forgings, ornamental works, stakes, brackets, automotive and agricultural equipment, frames, machinery parts.
  • It is used for various parts obtained by flame cutting such as in parking garages, walkways, boat landing ramps and trenches.
 
Equivalent grades:
Standard
IS 2062 GR E250 , E350 , E410 AND E450 A / B / BO / BR, A36, etc
Width
1000mm – 3000mm
Thickness
1mm – 300mm
Production
Hot-Rolled (HR) / Cold-Rolled (CR)
 
Addition to other grades:
MS, EN1a, EN3b, EN8, EN8d, EN9, EN19, EN24, EN31, EN32b, EN36c, EN41b, EN43b, EN47, EN353, IS2062, 42Crmo4, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS, M2, M35, M42, 2714, SKD-11, P20, P20+s, P20+Ni, SCM 420, ASTM SA-105, SAE 1018, SAE 1020, SAE 4140, SAE 8620, 16MNCR5, 20MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.
 
Our Supply Range:
 
Price List:
 
People also search as:
ASTM SA-36, ASTM SA-36 Steel,  ASTM SA-36 Chemical composition, ASTM SA-36 Mechanical properties, ASTM SA-36 Equivalent Grades, ASTM SA-36 steel plate, ASTM SA-36 steel sheet, ASTM SA-36 manufactures, ASTM SA-36 suppliers, ASTM SA-36 dealers, ASTM SA-36 Stockiest, ASTM SA-36 distributors, ASTM SA-36 whole sellers, ASTM SA-36 Traders.
 
Chemical composition:
The following table shows the chemical composition of ASTM SA-36 steel:
Element
C
Cu
Fe
Mn
P
Si
S
Content (%)
0.25-0.29
0.20
98.0
1.03
0.040
0.280
0.050
 
Mechanical Properties:
Mechanical Properties
Metric
Imperial
Tensile Strength, Ultimate
400 – 550 MPa
58000 – 79800 psi
Tensile Strength, Yield
250 MPa
36300 psi
Elongation at Break (in 200 mm)
20.0 %
20.0 %
Elongation at Break (in 50 mm)
23.0 %
23.0 %
Modulus of Elasticity
200 GPa
29000 ksi
Bulk Modulus (typical for steel)
140 GPa
20300 ksi
Poissons Ratio
0.260
0.260
Shear Modulus
79.3 GPa
11500 ksi
 
Hardness:
 
Heat treatment:
 
Hardening:
Hardening at 788°C – 816°C(1450°F-1500°F)
 
Tempering:
 
Physical Properties:
Physical Properties
Metric
Imperial
Density
7.85 g/cm3
0.284 lb/in3
 
Thermal Properties:
 
Forging Properties:
 
Stress Reliving:
Stress relieving at 677°C – 927°C(1250°F-1700°F)
 
Normalizing:
Normalizing at 899°C – 954°C (1650°F-1750°F)
 
Annealing:
Annealing at 843°C – 871°C(1550°F-1600°F)
 
Density:
Density
7.85 g/cm3
0.284 lb/in3
 
Machine ability:
The machinability rate of ASTM  SA36 is estimated to be 72%, and the average surface cutting feed of ASTM  SA36 is 120 ft/min. Machining of ASTM  SA36 steel is not as easy as that of AISI 1018 steel.
 
Welding:
ASTM  SA36 steel is easy to weld using any type of welding methods, and the welds and joints so formed are of excellent quality.
 
Supply Cities:
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Thoothukudi, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thajavur, Tiruchurapalli, Comibatore, Erode,  Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchepuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijaywada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.