SCM420 Round Bars, SCM420 Round bar manufacturer, SCM420 Rods Supplier, SCM420 Stockiest, SCM420 Dealers, SCM420 Distributors, SCM420 Whole sellers.
 
SCM420 are alloy steel with high hardenability, temper brittleness, well weldability, less cold cracking tendency, good machinability, and great cold plastic strain. SCM420 generally are used for the parts which need high wear resistance, such as gears, shafts, high-pressure pipes, all kinds of fasteners, and so on. Carburizing structural steel.
 
Grade Application:
SCM420 case hardening alloy steels are widely used as gear components of all kind and cog wheels. Open die steel forgings for general engineering purposes. Steel is available to supply different size of SCM420 steel and is able to supply modified SCM420 steel composition according to different requirements.
 
Equivalent grades:
GB 20CrMo, JIS SCM420, ASTM 4118, DIN 25CrMo4.
 
Addition to other grades:
MS, EN1a, EN3b, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, En47, EN353, IS2062, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS, M2, M35, M42, 2714, SKD-11, P20, P20+s, P20+Ni, ASTM Sa-36, ASTM SA-105, SAE 1018, SAE 4140, SAE 8620, 16MNCR5, 20MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.
 
Our Supply Range:
 
Price List:
 
People also search as:
SCM420, SCM420 Steel, SCM420 Chemical composition, SCM420 Mechanical properties, SCM420 Equivalent Grades, SCM420 steel plate, SCM420 steel sheet, SCM420 manufactures, SCM420 suppliers, SCM420 dealers, SCM420 Stockiest, SCM420 distributors, SCM420 whole sellers,  SCM420 Traders.
 
Chemical composition:
The following table shows the chemical composition of SCM420 steel:
Element
C
Mn
Si
P
S
Cr
Mo
Ni
Cu
Content (%)
0.18-0.23
0.60-0.85
0.15-0.35
0 ≦ 0.03
0 ≦ 0.03
0.90-1.20
0.15-0.30
0 ≦ 0.025
0 ≦ 0.03
 
Mechanical Properties:
Tensile strength (kgf/mm²): ≧95
Elongation (%): ≧14
Cross section reduction rate (%): ≧40
Impact value (J/cm2): ≧6
Hardness (Hb) : 352~362
 
Hardness:
352-362
 
Heat treatment:
 
Hardening:
850~900℃ 1st Oil Cooling, 800~850℃ 2rd Oil Cooling.
 
Tempering:
150~200℃ Air Cooling.
 
Physical Properties:
  • Modulus of elasticity [103 x N/mm2]: 210
  • Density [g/cm3]: 7.85
  • Thermal conductivity [W/m.K]: 20.0
 
Thermal Properties:
Thermal conductivity [W/m.K]: 20.0
 
Forging Properties:
Hot forming temperature: 1100-850℃
 
Stress Reliving:
 
Normalizing:
850~900℃ Air Cooling
 
Annealing:
850℃ Furnace Cooling
 
Density:
Density [g/cm3]: 7.85
 
Machine ability:
Machinability (hot rolled and cold drawn, based on 100 machinability for AISI 1212 steel)
 
Welding:
The weldability of AISI 4118 steel is also very good, with excellent machining or cutting properties.
 
Supply Cities:
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Thoothukudi, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thajavur, Tiruchurapalli, Comibatore, Erode,  Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchepuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijaywada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.