20MNCR5 Round Bars, 20MNCR5 Round bar manufacturer, 20MNCR5 Rods Supplier, 20MNCR5 Stockiest, 20MNCR5 Dealers, 20MNCR5 Distributors, 20MNCR5 Whole sellers.

 

Grade Introduction:
20MnCr5 steel is a low alloyed engineering case hardening steel for parts which require core tensile strength of 1000 – 1300 N/mm² and good wearing resistance.
This steel is carburizing steel used for components requiring high wear resistance surface, coupled with tough cores to resist shock loads and strength to give large service life.
 
 Grade Application:
DIN 20MnCr5|1.7147 gearing steel steel is widely used for a variety of applications in the used to the gearings in rotating machinery. Typical applications such as valve bodies, pumps and fittings, the high load of wheel, bolts, double-headed bolts, gears, internal combustion engine. Electric locomotives, machine tools, tractors, steel rolling equipment, boring machine, railway vehicle, and mining machinery transmission shaft on the steel ball, roller and shaft sleeve, etc.
 
Equivalent grades: 
ASTM A29/A29M DIN EN 10083/3 JIS G4053 DIN DIN/T DIN17210
 
Addition to other grades:
MS, EN1a, EN3b, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, En47, EN353, IS2062, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS, M2, M35, M42, 2714, SKD-11, P20, P20+s, P20+Ni, ASTM Sa-36, ASTM SA-105, SAE 1018, SAE 4140, SAE 8620, SCM420, 16MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.
 
Our Supply Range:
 
Price List:

 

 
People also search as:
20MnCr5, 20MnCr5 Steel, 20MnCr5 Chemical composition, 20MnCr5 Mechanical properties, 20MnCr5 Equivalent Grades, 20MnCr5 steel plate, 20MnCr5 steel sheet, 20MnCr5 manufactures, 20MnCr5 suppliers, 20MnCr5 dealers, 20MnCr5 Stockiest, 20MnCr5 distributors, 20MnCr5 whole sellers, 20MnCr5 Traders.
 
Chemical composition:
The following table shows the chemical composition of 20MNCR5 steel:
Element
C
Si
Mn
P
S
Cr
Content (%)
0.17~0.22
≤0.40
1.10~1.40
≤0.035
≤0.035
1.00~1.30
 
Mechanical Properties:
The mechanical properties of annealed DIN 20MnCr5/1.7131 gearing steel (typical for steel) are outlined in the table below:
Tensile
Yield
Bulk modulus
Shear modulus
Poisson’s ratio
Thermal conductivity
MPa
Mpa
Gpa
Gpa
 
 W/mK
520
415 Min
140
80
0.27-0.30
46.6
 
Hardness:
 218
 
Heat treatment:
When hardening 20MnCr5 heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each steel component. Other considerations during heat treatment include the type of furnace, quenching medium and work piece transfer facilities. Please consult a heat treatment specialist for full guidance on heat treatment of 20MnCr5 steel.
 
Hardening:
Hardening °C – 780-820
 
Tempering:
Tempering °C – at least twice 150-200
 
Physical Properties:
Thermal Conductivity at °C
20
350
700
W/(m*K)
11.7
12.8
13.5
 
Thermal Properties:
 
Forging Properties:
Hot Forming temperature: 1100-850 °C .
 
Stress Reliving:
Stress-relief annealing °C – 550-600
 
Normalizing:
850-880 °C , air cool
 
Annealing:
Heat to 650-700 oC.
 
Density:
Density (×1000 kg/m3)
7.7-8.03
25
 
Machine ability:
 
Welding:
 
Supply Cities:
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Thoothukudi, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thajavur, Tiruchurapalli, Comibatore, Erode,  Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchepuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijaywada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.