16MNCR5 Round Bars, 16MNCR5 Round bar manufacturer, 16MNCR5 Rods Supplier, 16MNCR5 Stockiest, 16MNCR5 Dealers, 16MNCR5 Distributors, 16MNCR5 Whole sellers.
 
Grade introduction : 
16MnCr5 steel are alloyed case hardening engineering steels for parts which require core tensile strength of 800 – 1100 N/mm² and good wearing resistance. It is an engineering material typically used to manufacture piston bolts, camshafts, levers and other vehicle and mechanical engineering components.
 
Grade application: 
DIN 16MnCr5|1.7131 steel is widely used for a variety of applications in the used to the gearings in rotating machinery. Typical applications such as valve bodies, pumps and fittings, the high load of wheel, bolts, double-headed bolts, gears, internal combustion engine. Electric locomotives, machine tools, tractors, steel rolling equipment, boring machine, railway vehicle, and mining machinery transmission shaft on the steel ball, roller and shaft sleeve, etc.
 
Equivalent grades :
ASTM A29/A29M DIN EN 10083/3 JIS G4053 DIN DIN/T DIN17210
 
Addition to other grades:
MS, EN1a, EN3b, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, En47, EN353, IS2062, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS, M2, M35, M42, 2714, SKD-11, P20, P20+s, P20+Ni, ASTM Sa-36, ASTM SA-105, SAE 1018, SAE 4140, SAE 8620, SCM420, 42CRMO4, 20MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.
 
Our Supply Range:
 
Price List:
 
People also search as:
16MnCr5, 16MnCr5 Steel, 16MnCr5 Chemical composition, 16MnCr5 Mechanical properties, 16MnCr5 Equivalent Grades, 16MnCr5 steel plate, 16MnCr5 steel sheet, 16MnCr5 manufactures, 16MnCr5 suppliers, 16MnCr5 dealers, 16MnCr5 Stockiest, 16MnCr5 distributors, 16MnCr5 whole sellers, 16MnCr5 Traders.
 
Chemical composition:
The following table shows the chemical composition of 16MNCR5 steel:
Element
C
Si
Mn
P
S
Cr
Content (%)
0.14~0.19
≤0.40
1.00~1.30
≤0.035
≤0.035
0.80~1.10
 
Mechanical properties : 
The mechanical properties of annealed DIN 16MnCr5/1.7131 gearing steel (typical for steel) are outlined in the table below:
Tensile
Yield
Bulk modulus
Shear modulus
Poisson’s ratio
Thermal conductivity
MPa
Mpa
Gpa
Gpa
 
 W/mK
520
415 Min
140
80
0.27-0.30
46.6
 
Hardness :
Brinell hardness in the condition
+S max.
+A max.
+TH
+FP
min.
max.
min.
max.
*
207
156
207
140
187
 
Heat treatment properties: 
When hardening 16MnCr5 heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each steel component. Other considerations during heat treatment include the type of furnace, quenching medium and work piece transfer facilities. Please consult a heat treatment specialist for full guidance on heat treatment of 16MNCr5 steel.
 
Hardening :
Harden from a temperature of 860-980°C followed by water, oil or thermal bath quenching.
 
Tempering :
Tempering temperature: 150-200°C.
 
Physical properties : 
 
Thermal properties: 
 
Forging properties :
Hot forming temperature: 1100-850°C.
 
Stress reliving
 
Normalizing : 
Temperature: 850-880°C.
 
Annealing : 
Heat to 650-700°C, cool slowly.
 
Density: 
 
Machine ability
 
Welding
 
Supply cities
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Thoothukudi, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thajavur, Tiruchurapalli, Comibatore, Erode,  Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchepuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijaywada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.