Hot Die Steel supplier in chennai

Hot Die Steel H11

Hot Die steels are designated as group H steels according to the AISI classification system. This series of steels start from H1 to H19. The most commonly used chromium hot-work steels are H11, H12, and H13, which can be air hardened in 150 mm thick sections. The steels are subjected to minimal distortion during hardening due to their balanced alloy content. The tools produced from chromium hot-work steels can be cooled using water without damage as these steels have low carbon and alloy contents.This article will give an overview of H11 chromium hot-work steels, which have low carbon content and good toughness. These steels can be deep hardened by heat treatment and air-quenching.

Hot Die Steel H13

Chromium hot-work tool steels are designated as group H steels according to the AISI classification system. This series of steels start from H1 to H19. The most commonly used chromium hot-work steels are H11, H12, and H13, which can be air hardened in 150 mm thick sections. The steels are subjected to minimal distortion during hardening due to their air-hardening and balanced alloy content. The tools produced from chromium hot-work steels can be cooled using water without damage as these steels have low carbon and alloy contents.

Hot Die Steel H21

Tungsten hot-work steels are of different types, namely, H21 to H26 types. These steels have similar characteristics to that of high-speed steels. The primary alloying elements in tungsten hot-work steels include tungsten, chromium, carbon, and vanadium. They are resistant to distortion when they are air-hardened, and have higher hardening temperature when compared to chromium hot-work steels. Breakage of the tungsten hot-work steels can be reduced if they are preheated to operating temperature before use. Thermal shock resistance and toughness of these steels can be improved by reducing the carbon content.